VIEW CART & SEARCH FOR PRODUCTS
 

Smooth-On Sil-Poxy - To fix tears and adhere RTV Silicones

    CLICK HERE FOR OFFICIAL MSDS SHEET

    Sil-Poxy™ is a one component adhesive made specifically forbonding Smooth-On RTV moldmaking silicone rubbers to silicone rubber and other substrates including some plastics (urethane), plasters/ceramics, fabrics, etc.

    Sil-Poxy™ will work with tin- or platinum-cure silicones and provides a strong, flexible bond between silicone parts with high elongation. Can be colored with Silc-Pig™ silicone pigments. Cured adhesive resists weathering, moisture, UV and high temperatures.

    Sil-Poxy™ can be used repairing torn silicone rubber molds. Other applications include bonding silicone for prosthetics and animatronics

    Features

    • Can be used repairing torn silicone rubber molds.
    • Will work with tin- or platinum-cure silicones
    • Provides a strong, flexible bond

    Instructions

    Safety - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.

    Store and use material at room temperature (73°F/23°C). This product has a limited shelf life and should be used as soon as possible.

    A clean, dry surface is essential for successful adhesive bonding. If possible, abrade surface and follow with solvent wipe before applying.

    Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.

    Dispensing - Squeeze tube, taking care not allow air to enter tube before replacing cap. Unused product in tube exposed to air will cure quickly.

    Applying - Apply adhesive to surface and mate parts. Material will begin to cure in 15 minutes. Pieces can be handled after 1 hour. Full cure is attained after 24 hours. Warmer temperatures (and higher humidity) will result in a faster cure. Lower temperature will retard cure.

    Data At-A-Glance

    Specific Gravity 1.12 g/cc
    Cure Time 12 minutes
    Color Translucent
    Shore Hardness 40 A
    Tensile Strength 750 psi
    Elongation @ Break 750 %
    Useful Temperature (min) -50 °F
    Useful Temperature (max) 500 °F
    Pot Life 5 minutes
    Mixed Viscosity Light Paste


    Next Previous

    Related Items